Site Information

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6

Cisco CCNA 200-125 / 200-301 Primed & Ready Standard Kit

$469.99
SKU:
SKU-3020
Quantity:

Product Description

CCNA Standard 200-125 / 200-301 Primed and Ready Kit.

This is a great mid-range CCNA R&S 200-125 study lab kit that will also work great for the upcoming 300-201 exam.  This kit is geared for your success! We include three Dual Fast Ethernet 1841 256/64 Routers running IOS 15.1(4) which will act as your NAT/PAT router, support IPv6, inter-vlan routing, and CCP.  You will also get three 2960-TT switches which can run 15.0(2 )IOS LanBase, IPv6 addressing and can do very limited Layer 3 static routing..  The routers also come installed with a total of four WIC-1DSU-T1 modules and two WIC-1DSU-T1v2 Serial Crossover Cables for your serial connections in addition to Ethernet crossover cables for your LAN connections between the routers.  

This kit is the economy option to get you going on your path to success on a budget.  You can do a whole lot of labbing with this budget friendly lab kit.  Since this is entry level equipment on the routing end, you may run into a "few bumps in the road" with the very advanced labs, but for a CCNA candidate watching their pocket, this will get you the experience you need to master the test!

We have worked in partnership with Cisco NetAcad instructors and CCIEs to release our kits that are not only going to cover you to hustle to beat the 200-125 before the exam update, but also primed and ready for the CCNA 200-301 exam update coming in February 2020!  This time around, Cisco has released a couple topology options covering their minimum hardware topology/hardware requirements and their recommended requirements for the optimal learning experience. To satisfy the minimum requirement, Cisco is requiring two routers and two switches.  However, our recommendation and Cisco’s recommendation is to run a three router and three switch lab. This is also the topology we write our lab workbook for because we know this is going to best prepare you to pass the CCNA! If you don’t want to go with a three router and three switch setup, don’t worry, you can still do all the labs by scaling back a two router and two switch kit.  Cisco does have a small wireless component that will be part of the new exam, but this is simply a generic wireless router that you already have at home. The best part about this is that these labs will also work exceptionally for the current 200-125 exam!  

 We highly encourage you to beat the clock, buckle down and get your CCNA before the exam change.  If you can pull that off, Cisco will grant you the new 200-301 cert in February, a badge and you will be amongst the first to have what will be one of the most sought after certifications on a level that surpasses even its current prestigious status.  CCNA is hotter and trending more than it ever has! Always remember that as the CCNA certification progresses, it proves more and more that you know your stuff! With this, so does the amount of money you can expect to make as a Cisco Certified Network Engineer!  This is one of the fastest growing fields in the world and with that comes the rewards, if you have the drive!


To add the icing on the cake, all of the Primed and Ready kits will also be coming with a free digital download upgrade to our revised Lab Workbook and CCNA eBooks when they are released quarter one 2020!  What do you have to lose?  We will continue to bring you only the best labs on the market that test proven and helped thousands obtain their certifications over 20+ years of being the premiere source for Cisco lab kits.  These are written by not only by highly certified individuals, but by passionate professionals who work with students every day and know what it takes to succeed through experience!


Nowhere else can you get our copyrighted 470+ page CertificationKits Self Study CCNA Lab Workbook that will walk you through 60 different labs! You will also get our How and Why We Subnet Workbook that will have you mastering subnetting in no time! Why would you spend hundreds of dollars on a lab kit if you don't get the labs that accompany your equipment? Also included, is our CertificationKits ICND1, ICND2 & CCNA Exam Simulator with over 450 different questions that will be similar to those you will see on the actual exam. Finally, you will receive our CCNA Boot Camp Study Guide eBooks, our TFTP Server, Subnet Calculator, 35 CCNA Instructional Videos and so much more.

Hardware Included:

  • Three Cisco 1841 256/64 Routers (Dual FE router supports 15.1(4) Advanced IP Services)
  • Three Cisco 2960-TT-L Switches (Supports 15.0(2) IOS) and IPv6 addressing and can do very limited Layer 3 static routing.
  • Three Ethernet Patch Cables
  • Three Ethernet Crossover Cables
  • Four WIC-1DSU-TI modules
  • Two WIC-1DSU-T1 crossover cables
  • Cisco Console Kit
  • Power Cords

Additional Items Include:

  • 470 Page CCNA Lab Workbook Covering 60+ Labs! ($44.99 value) (more info)
  • How & Why We Subnet Workbook ($19.99 value) (more info)
  • CCENT, ICND2 & CCNA Boot Camp Study Guide eBooks ($49.99 value) (more info)
  • CCENT, ICND2 & CCNA Practice Exam Simulators ($49.99 value) (more info)  (Includes practice test files and trial of software.  Software requires paid activation past the free trial) 
  • CCNA CRAM Sheet ($14.99 value) (more info)
  • TCP/IP Study Poster ($9.99 value) (more info)
  • CertificationKits TFTP Server
  • CertificationKits Subnet Calculator
  • CertificationKits Binary Bits Game
  • 35 CCNA Instructional Videos
  • Cisco Network Assistant
  • Cisco Router Password Decryptor
  • Cisco VPN Client 5.0.04.0410
  • Port Scanner
  • WinPcap 4.1.3
  • WireShark 1.10.05
  • IOS Backup Disc for the routers and switches

Optional Upgrade To Smart Serial Cards & Cables Includes:

(Replaces 1DSU-T1 cards and WIC-Crossover Cables)

Three WIC-2A/S Modules

Two Smart to Smart Back to Back Serial Cables

***Why should you consider upgrading from the HWIC/WIC-1DSU-T1 Serial cards to the Smart Serial Cards?***

The WIC-1DSU-T1v2 Serial cards are a great, budget friendly option for lab purposes.  However, if your budget allows, we always recommend upgrading to the smart serial WIC cards and Smart Serial-to-Smart Serial cables.  Smart serial is a more current technology that offers a faster DCE/DTE connection that will also use the same clock rate command you will see in all of your labs on every exam, regardless the level.  Once again, the WIC-1DSU-T1v2 Serial cards will work just fine (the clock rate command is slightly different and that difference is covered in our CCNA Lab Workbook), but if you want to be the most up to date and want the clock rate commands to match identically like you would see when you are sitting your exam, the smart serial upgrade is an excellent choice.  

The FTDI Console Cable Upgrade swaps out the classic console cable for this new solution to complete your console connection. This is our newest option for your console connection. This cable has the new FTDI chip installed and eliminates the need for both the classic console connection and the USB-Serial Adapater!  It goes directly from USB to RJ-45! Another great bonus to this, from our testing, is that it has a near perfect success rate in the break sequence working! (used to reset the router, password recovery, etc). This is a big bonus because the converters can be a bit of a pain in that department.  All around, this is an excellent addition to any techs tool box!  *If you do not have a 9-Pin serial port on your computer (most modern computers do not) or a USB-to-Serial converter, you will need this to complete your console (management) connection.  We highly recommend this

 

Find Similar Products by Category