Cisco CCNA & Super Economy CCNP Kit
This Super Economy CCNP Kit shown with the rack and rack mount options is designed to give you the most bang for your buck to help you pass both your CCNA and CCNP exams. So it will do two exams in one kit!
You get routers and switches that will help you get hands on experience in most of the CCNP disciplines for the ROUTE, SWITCH and TSHOOT exams. The major difference in this kit versus our Standard CCNP kit is that this kit has 2950s(you may want to consider upgrading the 2950 Standard Image switches to Enhanced Image with the 2950C model to support a few more commads as covered in our Lab Suggestions article) in place of the 2960s, a 3550 in place of the 3560 and it does not have the IP Phones, Wireless Controll or Access Points. But that is ok as they will still do 95% of the concepts for the SWITCH exam. It is a great low end CCNP kit and will support the 80+ labs in the Cisco Academy CCNP lab workbooks!
We also allow you to tweak the kit to your liking. So here are the upgrade options available:
In regards to router upgrades here is what is available:
- The base 1841 router that comes with the kit is a dual FE ISR router that comes with two HWIC slots and runs 12.4(25). This router can do your NAT/PAT labs and CCP. The 256/64 upgrade allows you to run IOS 15.1(4). The 384/128 upgrade allows for multiple IOSes.
- The 2801 upgrade is also a dual FE ISR router that offers two additional HWIC slots over the 1841 with enhanced functionality, dual AIM slots and PVDM slots on the motherboard for future Voice use. 256/64 runs 15.1 IP Base and 384/128 runs IOS 15.1 Advanced IP Services for CCNA Security.
- The 2811 upgrade can do everything the 2801 can and more. It is more flexible, has additional Network Module slots and is the preferred router to match up with the CCNA Voice lab workbook. 512/128 runs IOS 15.1(4). Advanced IP Services for CCNA Security and Advanced Enterprise Services for CCNA Voice.
- The 2821 upgrade has all the functionality the 2811 does plus two Gigabit Ethernet interfaces. This way if you are going to use it in your home network, you can have blazing fast speeds! 512/128 runs IOS 15.1(4). Advanced IP Services for CCNA Security and Advanced Enterprise Services for CCNA Voice.
In regards to the switch upgrades, here is what is available:
- The base 2950 supports 12.1.22 (SI) Stanard Image IOS which covers 95% of the CCNA exam. It can pass IPv6 traffic, but does not support IPv6 addressing.
- The 2950C/T/G upgrade supports 12.1.22 (EI) Enchanced Image IOS which will support Enhanced QoS, 802.1s MISTP, and 802.1w RSTP.
- The 2960 upgrade supports 15.0(2) IOS and IPv6 addressing and can do very limited Layer 3 static routing.
- The 3550 upgrade supports true Layer 3 routing while running 12.2(44)SE6 EMI IOS.
- The 3560 upgrade supports 15.0(2)SE5 and true Layer 3 routing and PVLAN and QoS features the 3550 does not.
- The 3750 upgrade is the newest series of switches that we offer that you will see in the real world. These have 12.2(55) switches have StackWise ports that none of the other switches have so you can stack them and manage them as an entire entity to make it easier to manage a large enterprise environment.
Listed below are the componets of the kit of which you can select any of the upgrades we described above.
- Tested and Guaranteed working!!
- Four 1841 Dual FastEthernet 256/64 15.1(4) NAT & Firewall Concept Router
- Two 3550 12.2(44) EMI 24 port POE Layer 3 Switches
- Two 2950 12.1(22) IOS Switches
- Five WIC-2A/S Two Port Smart Serial Modules
- Four Smart to Smart Back to Back Serial Cables
- Four Ethernet Patch Cables
- Ten Crossover Ethernet Patch Cables
- 8 Power Cords
- Additional Items Include:
- CertificationKits CCNP ROUTE, SWITCH, TSHOOT Boot Camp Study Guide eBooks ($59.97 value)
- 450 Page CCNA Lab Workbook Covering 60+ Labs! ($44.99 value)
- How & Why We Subnet Workbook ($19.99 value)
- CCENT, ICND2 & CCNA Practice Exam Simulators ($149.97 value)
- CCENT, ICND2 & CCNA Boot Camp Study Guide eBooks ($89.97 value)
- CCNA CRAM Sheet ($14.99 value)
- TCP/IP Study Poster ($9.99 value)
- CertificationKits TFTP Server
- CertificationKits Subnet Calculator
- CertificationKits Binary Bits Game
- 50 CCNA Instructional Videos
- Cisco Network Assistant
- Cisco Router Password Decryptor
- Cisco VPN Client 5.0.04.0410
- Port Scanner
- WinPcap 4.1.3
- WireShark 1.10.05
- IOS Backup as noted above for the routers and switches
- Cisco Configuration Professional (CCP) 2.8 for 1841/2800 Series Routers
These are the same study guides you would receive if you attend one of our CCNP boot camps. The CCNP ROUTE 642-902 study guide is 273 pages long and follows the format of an official curriculum book in that it has a Power Point slide at the top of each page and text describing the concept below it. The SWITCH 642-813 study guide is 245 pages and the TSHOOT study guide is 173 pages.
So how are we able to deliver all three study guides normally priced $59.97 for the special bundled price of $49.99? It is delivered in a locked eBook format (this is to prevent illegal sharing as we spent over 1,000 hours creating it). We cover all the topics on the new Cisco exams. Below we have outlined the chapters covered and provided a sample slide and a PDF sample chapter covering Implementing an EIGRP Based Solution.
Chapter 1 – Planning Routing Services
Chapter 2 – Implementing an EIGRP based Solution
Chapter 3 – Implementing a Multi-Area OSPF Solution
Chapter 4 – Implementing an IPv4 Based Solution
Chapter 5 – Implementing Path Control
Chapter 6 – Connecting an Enterprise to an ISP Network
Chapter 7 – Implementing IPv6
Below we have outlined the chapters covered and provided a sample slide and a PDF sample chapter covering Implementing Spanning Tree.
Chapter 1 – Analyzing Campus Network Designs
Chapter 2 – Implementing VLANs in a Campus Network
Chapter 3 – Implementing Spanning Tree
Chapter 4 – Implementing Inter-VLAN Routing
Chapter 5 – Implementing First Hop Redundancy
Chapter 6 – Implementing a Highly Available Network
Chapter 7 – Minimizing Service Loss & Data Theft
Chapter 8 – Intergrating Wireless LAN into a Campus Network
Chapter 9 – Accomodating Voice & Video in a Campus Network
Below we have outlined the chapters covered and provided a sample slide and a PDF sample chapter covering Troubleshooting Routing Based Solutions.
Chapter 1 – Planning Maintenance for Complex Networks
Chapter 2 – Maintenance & Troubleshooting Tools & Applications
Chapter 3 – Troubleshooting Processes for Complex Enterprise Networks
Chapter 4 – Maintaining & Troubleshooting Campus Switch Based Problems
Chapter 5 – Maintaining & Troubleshooting Routing Based Solutions
Chapter 6 – Maintaining & Troubleshooting Network Security Solutions
Below are the labs which are covered in the lab manuals described above. Please make sure you scroll all the way down to see all the items included in this kit.
CCNP Lab Workbook - Optional
Lab 1-1 Tcl Script Reference and Demonstration
Lab 2-1 EIGRP Configuration, Bandwidth, and Adjacencies
Lab 2-2 EIGRP Load Balancing
Lab 2-3 EIGRP Summarization and Default Network Advertisement
Lab 2-4 EIGRP Frame Relay Hub-and-Spoke: Router Used as a Frame Relay Switch
Lab 2-5 EIGRP Authentication and Timers
Lab 2-6 EIGRP Challenge Lab
Lab 2-7 Troubleshooting EIGRP
Lab 3-1 Single-Area OSPF Link Costs and Interface Priorities
Lab 3-2 Multi-Area OSPF with Stub Areas and Authentication
Lab 3-3 OSPF Virtual Links and Area Summarization
Lab 3-4 OSPF over Frame Relay
Lab 3-5 OSPF Challenge Lab
Lab 3-6 OSPF Troubleshooting Lab
Lab 3-7 OSPF Case Study
Lab 4-1 Redistribution Between RIP and OSPF
Lab 4-2 Redistribution Between EIGRP and OSPF
Lab 4-3 Manipulating Administrative Distances
Lab 4-4 EIGRP and OSPF Case Study
Lab 5-1 Configure and Verify Path Control
Lab 5-2 Configure IP SLA Tracking and Path Control
Lab 6-1 Configuring BGP with Default Routing
Lab 6-2 Using the AS_PATH Attribute
Lab 6-3 Configuring IBGP and EBGP Sessions, Local Preference, and MED
Lab 6-4 BGP Route Reflectors and Route Filters
Lab 6-5 BGP Case Study
Lab 7-1 Configure Routing Facilities to the Branch Office
Lab 8-1 Configuring OSPF for IPv6
Lab 8-2 Using Manual IPv6 Tunnels with EIGRP for IPv6
Lab 8-3 Configuring 6to4 Tunnels
Lab 8-4 IPv6 Challenge Lab
Lab 8-5 IPv6 Troubleshooting Lab
Lab 1-1 Clearing a Switch
Lab 1-2 Clearing a Switch Connected to a Larger Network
Lab 2-1 Static VLANS, VLAN Trunking, and VTP Domains and Modes
Lab 2-2 Configuring EtherChannel
Lab 3-1 Spanning Tree Protocol (STP) Default Behavior
Lab 3-2 Modifying Default Spanning Tree Behavior
Lab 3-4 Multiple Spanning Tree
Lab 4-1 Inter-VLAN Routing with an External Router
Lab 4-2 Inter-VLA Routing with an Internal Route Processo and Monitoring CFE Functions
Lab 4-3 VLANs, VTP, and Inter-VLAN Routing Case Study
Lab 5-1 Hot Standby Router Protocol
Lab 5-2 IP Service Level Arrangements in a Campus Environment
Lab 6-1 Securing Layer 2 Switches
Lab 6-2 Securing Spanning Tree Protocol
Lab 6-3 Securing VLANs with Private VLANs, RACLs, and VACLs
Lab 7-1 Configuring Switches for IP Telephony Support
Lab 7-2 Configuring a WLAN Controller
Lab 7-3 Voice and Security in a Switched Network
Lab 3-1 Assembing Maintenance and Troubleshooting Tools
Lab 4-1 Layer 2 Connectivity and Spanning Tree
Lab 4-2 Layer 3 Switching and First-Hop Redundancy
Lab 5-1 Layer 3 Connectivity and EIGRP
Lab 5-2 OSPF and Roue Redistribution
Lab 5-3 BGP
Lab 6-1 IP Addressing - Nat and DHCP
Lab 7-1 Router Performance
Lab 9-1 Management Plane Security
Lab 9-2 Control Plane Management
Lab 9-3 Data Plane Security
Lab 9-4 Troubleshooting Complex Environments
This is a complete Cisco certification kit and much more than just hardware to build a lab. Obviously we include the hardware you need but we also include ALL of the study material you need to pass your exam in one kit which we will show you samples of below. No other kit contains a physical 450+ page CCNA Lab Workbook, a physical 100 page Subnetting workbook, our three ICND1, ICND2, and CCNA practice exam simulators so that you can break your exam studies up in the way that best fits your study style. These practice exam simulators are so good that when they are purchased as a solo product we offer our Pass Guarantee. Then we also include our ICND1 1001-101, ICND2 200-101, and CCNA 200-120 Boot Camp Study Guides in Windows eBook format. These are not pirated copies of eBooks, but fully licensed copies that are 436, 384, and 780 pages respectively! So let’s take a look at some of these samples and then we will get to all of the other materials we include which we have not mentioned yet!
CCNA Lab Workbook
Here is a sample topology from our 450+ page CCNA Lab Workbook that will walk you through over 60 labs. You can see them all listed at the bottom of this page. Notice how we have redundant links and combine both WAN and LAN technologies in our lab as they each use different encapsulation types. These are the types of complex labs that will help you actually learn the topics in the CCNA exam. This is a $44.99 value alone.
Subnetting Lab Workbook
Now let’s take a look at a portion of a chapter in our subnetting workbook by downloading the sample chapter in pdf format here. Notice we explain the theory behind the process and then give you written lab exercises at the end of each section. You will get over 100 practice questions to burn subnetting into your brain! Keep in mind you will receive the full printed book when you order the kit. This is a $19.99 value alone.
ICND1, ICND2, and CCNA Exam Simulator
Now let’s take a look at a sample of our CCNA exam simulator program which you can download a trial version here. Notice that these are not simple questions like what protocol runs on port 21. You have to be able to read and understand the topology, comprehend the different subnets shown and understand what they infer that Cisco is not going to tell you and then draw conclusions based upon the problem that is described in the question. These are not the kind of questions you can brain dump. These force you to learn the concepts covered on the exam and prepare you for the types of questions you will see on the exam. We also provided detailed explanations on why each possible answer is right or wrong. You need to understand why you answered questions incorrectly so you don’t make the same mistake twice! These are so good that when purchased as a solo product we offer our Pass Guarantee. Each one of these normally costs $49.99 each when purchased separately for a total value of $149.97. Compare this to the exam simulators offered by Transcender for $139 or Measure-Up for $99 per exam!
ICND1, ICND2, and CCNA Boot Camp eBooks
We also include Windows eBooks from our ICND1 100-101, ICND2 200-101 and CCNA 200-120 boot camps (these are not pirated eBooks). You can click the link to download a PDF sample of our Advanced IOS Management chapter. We offer these eBooks individually for $29.99 each but we include all three in our kits for free! That is an $89.97 value.
CRAM Sheet, TCP/IP Poster & CCNA CBT Training DVD
You will also get our CCNA CRAM Sheet. This six page, full color laminated foldout is a great addition to your CCNA study arsenal which is easy to carry around so you can study the exam key points anywhere. You will also get our CCNA TCP/IP Study Poster to hand in your cube or study area. It compares and contrasts many of the differences between IPv4 and IPv6 for your CCNA exam. You can also add as an option to your kit our CCNA CBT DVD. This CCNA computer based training is comprised of 44 videos that total more than 22 hours of CCNA training that you can get as a $50 add-on to your kit. This is the same instruction you would receive it you sat in a full week CCNA boot camp.
Having a problem with one of our lab scenarios? We include free lifetime support for our customers. Just shoot us an email and we will help you through it!
The total value of our study materials that are added to your kit is $329.90! You will need to have these extra items like a lab workbook, subnet workbook, practice exams and study guides. Why buy them elsewhere when you can get them for free with your kit? The total value of these items are more than the cost of most of our kits and it is all included for FREE!
Additional Tools and Study Material Included
We also include a ton of other cool things to make your lab experience the best it can be such as our TFTP Server so you can do your IOS upgrade labs, our Subnet Calculator for praticing subnetting, our Binary Bits game to make learning Binary fun, 50 Instructional videos and the many more tools listed below!
Additional Items Include:
CertificationKits TFTP Server
CertificationKits Subnet Calculator
CertificationKits Binay Bits Game
50 CCNA Instructional Videos
Cisco Network Assistant
Cisco Router Password Decryptor
Cisco VPN Client 5.0.04.0410
IOS Backup as applicable to the kit Routers and Switches
Cisco Configuration Professional (CCP) 2.8 for 1841/2800 Routers
What is covered in our 450 page CCNA Lab Workbook? Below you will see listed all the labs in the workbook. Please note that depending on the routers and switches in your lab, you may or may not be able to fully complete every lab.
Lab 1-1 Identifying Router Components and Accessories
Lab 1-2 Router Connectivity
Lab 1-3 Identify Router and Switch IOS
Lab 2-1 Cisco 1700/1800/2500/2600 Series Password Recovery
Lab 2-2 Configure Login, EXEC, and MOTD Banners
Lab 2-3 Configuring the Password Encryption Service
Lab 2-4 Exec Timeout and Login Failure Rate
Lab 2-5 Installing a TFTP Server & Overview
Lab 2-6 Upgrading the IOS for 1700/1800/2500/2600 Routers
Lab 2-7 Cisco Licensing
Lab 3-1 Terminal Server Setup
Lab 4-1 Static Routing
Lab 4-2 Default Routing
Lab 5-1 EIGRP Routing
Lab 5-2 EIGRP Split-Horizon
Lab 6-1 OSPF Routing
Lab 6-2 Multi-Area OSPF Routing
Lab 7-1 Cisco 2900/3500 Switch Password Recovery
Lab 7-2 Switching Introduction
Lab 7-3 VLANs
Lab 7-4 Trunking
Lab 7-5 VTP
Lab 7-6 Spanning Tree Protocol
Lab 7-7 Rapid Spanning Tree Protocol
Lab 7-8 Per VLAN Spanning Tree Protocol
Lab 7-9 Inter-VLAN Routing
Lab 7-10 Configuring an EtherChannel Link
Lab 7-11 Configuring EtherChannel Using PagP
Lab 7-12 Configuring Etherchannel Using LACP
Lab 7-13 Configuring a PortChannel Interface
Lab 8-1 Standard ACL
Lab 8-2 Extended ACL
Lab 8-3 Named ACL
Lab 8-4 Trusted Hosts
Lab 8-5 Controlling VTY Access
Lab 9-1 Cisco Discovery Protocol
Lab 9-2 DHCP, DHCP Relay & DHCP Exclusions
Lab 9-3 DNS
Lab 9-4 Configuring NTP
Lab 9-5 Configuring Logging to a Remote Syslog Server
Lab 9-5 NetFlow
Lab 9-6 Routing Redundancy with HSRP and VRRP
Lab 10-1 Static Inside Source Address Translation
Lab 10-2 Dynamic NAT
Lab 10-3 Overloading an Inside Global Address
Lab 11-1 Frame-Relay Switching
Lab 11-2 Frame-Relay on Physical Interfaces
Lab 11-3 Frame-Relay on a Point-to-Point Interface
Lab 11-4 Frame-Relay on Multi-Point Interfaces
Lab 12-1 PPP Encapsulation
Lab 12-2 PPP PAP Authentication
Lab 12-3 PPP CHAP Authentication
Lab 12-4 HDLC Encapsulation
Lab 13-1 IPv6 Link Local Addressing
Lab 13-2 IPv6 EUI-64 Addressing
Lab 13-3 IPv6 Site Local Addressing
Lab 13-4 IPv6 Global Addressing
Lab 13-5 EIGRP IPv6 Routing
Lab 13-6 Configuring Basic IPv6 OSPFv3
Lab 13-7 Configuring IPv6 over Frame-Relay with OSPFv3
Lab 14-1 Configuring an IPSec Tunnel
Lab 14-2 GRE Over IPSec Virtual Tunnel
Lab 15-1 Installing & Configuring Cisco Configuration Professional